Spool Pegs

Janome spool pegs come in various shapes and sizes. The days of the old metal pin have all but gone. Instead the modern spool peg is usually longer and usually horizontal. It lies flat across the top of your machine. In many cases the machine covers have to be removed to fit the new spool peg. Here you will find a wide selection of Janome spool pegs.
Showing 16 of 16 results
  • Janome Small Spool Peg Cap 822019004

    Janome Small Spool Peg Cap 822019004

    £1.32
    The ​​​​​​​Janome Small Spool Peg Cap 822019004 will fit the vast majority of Janome models with a horizontal plastic spool peg. In most cases the small spool peg cap is the best choice.
  • Janome Spool Peg 505067005

    Janome Spool Peg 505067005

    £2.50
    The ​​​​​​​Janome Spool Peg 505067005 is the horizontal fitting type, found on the modern Janome sewing machine. The old style verticle peg is gradually disappearing. This pin can often be snapped when lifting the machine.
  • Janome Spool Peg 639003001

    Janome Spool Peg 639003001

    £2.50
    The ​​​​​​​Janome Spool Peg 639003001 is a short and stout chap but he can break under pressure. Take care when fitting and remember not to grab the spool peg when lifting the machine.
  • Janome Spool Peg 652205109

    Janome Spool Peg 652205109

    £2.50
    The ​​​​​​​Janome Spool Peg 652205109 is a more traditional vertical spool peg. It is held in place by a small metal clip which often drops down inside your machine if you pull the peg out.
  • Janome Spool Peg 659067005

    Janome Spool Peg 659067005

    £2.50
    The ​​​​​​​Janome Spool Peg 659067005 should be handled with care. When the machine is wearing its cover, it's easy for the hand that slides in to catch the handle to grab the spool peg instead.
  • Janome Spool Peg 660005009

    Janome Spool Peg 660005009

    £2.50
    The ​​​​​​​Janome Spool Peg 660005009 fits the old Jem range of Janome sewing machines. They were always popular as a club machine, mainly by quilters who took them to their quilt clubs. 
  • Janome Spool Peg 660005010

    Janome Spool Peg 660005010

    £2.50
    The ​​​​​​​Janome Spool Peg 660005010 fits just the one model, the JP760. Take care when fitting.
  • Janome Spool Peg 722003002

    Janome Spool Peg 722003002

    £2.50
    The ​​​​​​​Janome Spool Peg 722003002 is the twin peg type. It is easily fitted to the back of the machine and is held in place with a screw. This spool peg fits the Janome RX18S model.  
  • Janome Spool Peg 724206106

    Janome Spool Peg 724206106

    £2.50
    The ​​​​​​​Janome Spool Peg 724206106 is fitted to the Janome MyStyle 22 which, as many teachers will know, is a model found in many schools and colleges.
  • Janome Spool Peg 731006106

    Janome Spool Peg 731006106

    £2.50
    The ​​​​​​​Janome Spool Peg 731006106 is another twin-peg type that screws onto the back of the machine. So it's very easy to replace. It fits a range of good quality basic Janome models.
  • Janome Spool Peg 797051007

    Janome Spool Peg 797051007

    £2.50
    The ​​​​​​​Janome Spool Peg 797051007 fits the Janome 1200D Coverlock machine. This type of push-in spool peg can snap at its fixing point. Or it may be pulled from its fitting and then lost.
  • Janome Spool Peg 809027004

    Janome Spool Peg 809027004

    £2.50
    The ​​​​​​​Janome Spool Peg 809027004 will fit the following models, TXL607 DKS300 DKS100 MC500E MXL50 MC400E. It is a stock item so usually it will be posted out on the same day you place your order.
  • Janome Spool Peg 856007004

    Janome Spool Peg 856007004

    £2.50
    The ​​​​​​​Janome Spool Peg 856007004 is designed to fit just one model, the Janome MC200E. Like all horizontal spool pegs, care must be taken when you lift or carry the machine.
  • Janome Spool Peg 859052003

    Janome Spool Peg 859052003

    £2.50
    The ​​​​​​​Janome Spool Peg 859052003 is yet another 'pivot type'. This type of spool peg is often damaged when lifting or transporting the machine.
  • Janome Spool Peg Metal Screw-in

    Janome Spool Peg Metal Screw-in

    £2.50
    The ​​​​​​​Janome Spool Peg Metal Screw-in was used on many of the old Newhome and Janome models. From day one most sewing machines were fitted with either a tapered 'knock-in' spool peg, or this screw-in type.
  • Janome Spool Peg Sleeve 652018103

    Janome Spool Peg Sleeve 652018103

    £2.50
    The ​​​​​​​Janome Spool Peg Sleeve 652018103 sits inside the top of the sewing machine and holds the spool peg in place. He's quite a robust chap and doesn't usually wear out or suffer damage but...