Janome Parts

Showing 25 of 25 results
  • Janome 1600P Tension Check Spring 767046006

    Janome 1600P Tension Check Spring 767046006

    The ​​​​​​​Janome 1600P Tension Check Spring 767046006 can become bent and twisted over time. Threads can catch and wrap around it which, when pulled with a heavy hand, may cause damage. Here is the replacement.
  • Janome 2 Pin Bulb 830999999

    Janome 2 Pin Bulb 830999999

    The ​​​​​​​Janome 2 Pin Bulb 830999999 is quite a tough chap. However, delicate care must be taken when fitting. His tow 'pins' can bend quite easily.
  • Janome 6500p Presser Bar Lift Lever

    Janome 6500p Presser Bar Lift Lever

    The ​​​​​​​Janome 6500p Presser Bar Lift Lever is made from tough cookie plastic. Time was when they were all made of metal. Having said that it would take some effort to break one.
  • Janome Base Rubber 647009002

    Janome Base Rubber 647009002

    The Janome Base Rubber 647009002 is found on a wide range of models. He's sometimes prone to going missing, especially if you keep your machine in a cupboard.
  • Janome Bulb Wedge Type 000026002

    Janome Bulb Wedge Type 000026002

    he Janome Bulb Wedge Type 000026002 fits a very wide range of models. Usually this bulb will endure for many years, but all bulbs blow at some time.
  • Janome Buttonhole Lever Knob

    Janome Buttonhole Lever Knob

    This​​​​​​​ Janome Buttonhole Lever Knob may go missing. Those with the heavier hand may pull the blighter from his anchor. If you do buy this replacement please be careful when fitting.
  • Janome Cover Pro Tension Units

    Janome Cover Pro Tension Units

    Here is a set of ​​​​​​​Janome Cover Pro Tension Units. Each one has a particular colour to indicate their position on the machine. Priced individually.
  • Janome Drive Belt 650166008

    Janome Drive Belt 650166008

    The Janome Drive Belt 650166008 is quite a hard wearing type.​ However, problems can occur if the belt becomes loose. This can cause the motor pulley to spin and wear the teeth away.
  • Janome Drive Belt 830276006

    Janome Drive Belt 830276006

    The ​​​​​​​Janome Drive Belt 830276006 will last a very long time under normal circumstances. If however the belt becomes loose it may begin to wear.
  • Janome Lift Lever 502024001

    Janome Lift Lever 502024001

    The ​​​​​​​Janome Lift Lever 502024001 fits a wide range of Janome sewing machines. Made from a durable plastic, the lever should last many years. However, even the old metal presser bar lift levers broke now and then.
  • Janome Lift Lever 735029004

    Janome Lift Lever 735029004

    The Janome Lift Lever 735029004 might snap after prolonged use. He's quite robust but accidents will happen. Please be careful when removing the old lever. Broken pieces may become lodged inside the machine.
  • Janome Lift Lever 849052105

    Janome Lift Lever 849052105

    The ​​​​​​​Janome Lift Lever 849052105 will last for many a year. However, eventually he may snap in two. This Janome presser bar lift lever, to give him his full name, is made from plastic.
  • Janome Lower Shaft Gear 650076000

    Janome Lower Shaft Gear 650076000

    The ​​​​​​​Janome Lower Shaft Gear 650076000 is durable component. Damage to the teeth can occur through lack of maintenance. A loose screw, a build up of thread or a trapped pin can cause trouble.
  • Janome MC6500p Handwheel

    Janome MC6500p Handwheel

    The ​​​​​​​Janome MC6500p Handwheel may well suffer damage in the busy sewing studio or classroom. The four finger clips are only so strong. If they are forced too far, they will snap.
  • Janome Motor Socket 852514007

    Janome Motor Socket 852514007

    The ​​​​​​​Janome Motor Socket 852514007 is another socket which will, generally speaking, last a long time. The multi-user environment might shorten its lifespan. Here is the replacement.
  • Janome Nut & Bolt

    Janome Nut & Bolt

    A Janome Nut & Bolt that fits into the base of the older models of Janome and Newhome. A small and perhaps insignificant part, but vital none the less. We sell them as a couple - Nut & Bolt.
  • Janome Pattern Selector Dial 743189215

    Janome Pattern Selector Dial 743189215

    The ​​​​​​​Janome Pattern Selector Dial 743189215 is quite robust. Years of use may snap the rear moulding so the dial becomes loose. You may also find the dial has gome missing altogether.
  • Janome Race Body 735610101

    Janome Race Body 735610101

    The ​​​​​​​Janome Race Body 735610101 fits most Janome front-loading models. The exceptions are the Jem and 1017. This part will only require replacing after years of very hard labour.
  • Janome Tension Unit 731508000

    Janome Tension Unit 731508000

    The ​​​​​​​Janome Tension Unit 731508000 is a part we seldom replace. However, it is a part we keep in stock, just in case. The last one we did replace was a result of vandalism in a school textiles classroom.
  • Janome Thread Cutter 840602006

    Janome Thread Cutter 840602006

    The ​​​​​​​Janome Thread Cutter 840602006 will fit a wide range of Janome models. Thread cutters are very handy and you will find one on most sewing machines. However, after some time the blade can become blunt and rough.
  • Janome Thumbscrew 850801307

    Janome Thumbscrew 850801307

    The Janome Thumbscrew 850801307 helps to clamp certain Janome embroidery hoops and frames. The thread on the thumbscrew will gradually wear until you can't tighten the nut.
  • Janome Thumbscrew Nut 000218601

    Janome Thumbscrew Nut 000218601

    The ​​​​​​​Janome Thumbscrew Nut 000218601 may wear out or he might go missing. Whatever the problem, here is the replacement. He fits the thumbscrew for the embroidery frame on the MC200E
  • Janome Thumbscrew Spring 718844309

    Janome Thumbscrew Spring 718844309

    The ​​​​​​​Janome Thumbscrew Spring 718844309 doesn't generally wear out but he may go missing. Undo the nut and 'ping' off he goes under the sideboard. Not to worry, here is the replacement.
  • Janome Top Thread Guide 654633003

    Janome Top Thread Guide 654633003

    The ​​​​​​​Janome Top Thread Guide 654633003 is located inside the top thread guide cover. It's usually the sort of part that only suffers damage in schools. Too heavy a hand might lead to problems.
  • Janome Top Thread Guide Body 650503506

    Janome Top Thread Guide Body 650503506

    The ​​​​​​​Janome Top Thread Guide Body 650503506 sits on top of the machine and holds the bobbinwinder tension unit on top, and the top thread guide (not included) inside.