Call us now : 0161 707 7786
 We are open 9am - 5pm Mon - Sat
Janome presser feet come in a wide range of types and fittings.
Convertible Even Feed Foot
The set includes everything you need for gorgeous quilting: an Even Feed Foot with Closed Toe, Convertible Open Toe Foot for extra visibility,
Convertible Freemotion Foot
The set includes three different feet that attach to the holder with a screw for maximum sturdiness and safety. includes a darning plate.
Janome 1/4 Inch Seam Foot Category A
A popular foot with patchworkers for that essential 1/4 inch seam. The guide on the foot enables you to sew a perfect 1/4 inch seam every time.
Janome 3-way Cording Foot
The 3-way Cording foot will hold one, two or three fine cords or threads. A variety of utility or decorative stitch can be sewn over the cords.
This presser foot is shorter than most for easier maneuvering around curves and corners when sewing applique pieces. Clear view sewing.
Janome Auto Buttonhole Foot at Bambers in Manchester
For sewing buttonholes on tight areas such as cuffs and other areas where more freedom of movement is required than available.
Janome Beading Foot
Sewing on strung beads and pearls has always been a tedious task but the beading foot now goes some small way to alleviating this.
Janome Binder Foot
The binder foot is used to apply pre-folded bias binding tape or bias tape you have cut yourself to the edge of fabric in one easy step.
Janome Blind-hem Foot
Blind hemming can sometimes be a little bit tricky so the blind hem foot goes some way to helping improve this technique.
Janome Clear View Foot
The small single hole in both the plate and the foot ensures the most control over your fabric possible and the least risk 'snatches'.
Janome Darning Foot
Often referred to as the embroidery foot, the darning foot is used for "free hand" embroidery and darning to ensure a proper stitch.
Janome Ditch Quilting Foot
A very useful addition to the sewing room when wanting a perfection straight "stitch in the ditch." The guide on the foot spreads the seams.
Janome Edge Guide Foot
This foot has unique features that allow your to stitch perfectly on the edges of fabrics. Use it to create a number of decorative trims.
Janome Embroidery Foot
Standard foot used for professional style embroidery on all Janome embroidery machines.
Janome Fringing Foot
The fringing foot is designed for fagoting and sewing thread fringe. This decorative touch is especially effective in applique work.
Janome Gathering Foot
This foot is for creating soft gathers in lightweight fabrics. The underside of the foot is shaped to gather and attach a ruffle.
Janome Invisible Zip Foot
The key is to get the needle as close the fastener as possible, which this foot accomplishes by slightly unrolling the zipper.
Janome Overedge Foot
Use with the overlock stitch to give a professional finish to the edges of your seams. Particularly good for finishing off woven fabrics.
Janome Pintucking Foot
The pintucking foot is used with a 2mm twin needle to create multiple rows of pintucks. Easier to stitch several rows parallel and evenly.
Janome Presser Foot Adaptor Black Plastic Snap-on
Janome Presser Foot Holder/Adaptor, Black Plastic, for the snap-on soles for 'low-shank' models.
Janome Presser Foot Thumb Screw
This Janome Presser Foot Thumb Screw fits the older range of Janome & Newhome models. Also fits some of the old Jones sewing machines
Open Toe Satin Stitch Foot
The open toe on this foot allows a better view of the sewing in progress. This foot can be used for quilting, applique and cutwork etc.